InfinityBox_install_CM2SP2_v2.00-r1 Update 2019

InfinityBox_install_CM2SP2_v2.00-r1 Update 2019 

Infinity Chinese Miracle-2 SPD/UniSoc v2.00 r1 - Initial Release!

- Supported platforms: 

 SpreadTrum:

  SC5735

  SC7715

  SC7731C, SC7731G

  SC9820

  SC9832A

  SC9850

  SC9853i

 UniSoC:

  SC9820E

  SC7731E  

  SC9832E 

  SC9850K

  SC9850KH

  SC9863

- Support Generic (Non-Secure), SecureV1, SecureV2 devices

  Android 4/5/6/7/8 versions 

  

- Supported operations in initial release:

  Identify ( include complete device info )

  Reset Settings / Format FS

  Reset FRP

  Firmware flashing ( Safe Flash, Repartition, HW verify, Flash customizing )

- Database:

 Basic wide-range bootloaders for common devices types

 Also lot of other pre-defined models already included in database 

  

- Extra: 

 Feature: Completely safe flash engine ( allow flash SimLock / Signed / and other devices, recover critical data from semi-damaged NV )

 Feature: Automatic ModelDB update at new model detection ( loader select, pac load etc. )

 Feature: Customized boot option and sources: Manual PAC, Manual FDL pair with automatic details detection, Pre-defined DB, Self-Learning DB 

 Feature: Complete Firmware Info detection at FW load with extended info

Download

Read More

Oppo Copy Kimfly A57 Flash File

Oppo Copy Kimfly A57 Flash File 100% Tested By Mimrombd

SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_A57

Kimfly A57

Logo Hang, Lcd Blank, Unfortunetly App Has Stoped, Etc Problem Will Be Fix By This File

Information

Card found: S/N : 2B566962 , v0137

Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Loading    : SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_A57.pac

CRVersion  : BP_R1.0.0

PacCPUinfo : SC77xx

PacVersion : SC7731_eMMC_SP7731C_1H10_32V4_6.0_INFINITY-BOX

FastCheck  : 0x00666C3026

Loading files ... 

File : Infinity_fdl1.bin

File : Infinity_fdl2.bin

File : nvitem_w.bin

File : nvitem_wcn.bin

File : prodnv.img

File : u-boot-spl-16k.bin

File : sc7731C_CP0_modem.bin

File : DSP_DM_Gx.bin

File : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin

File : logo_720x1280.bin

File : boot.img

File : system.img

File : cache.img

File : recovery.img

File : sysinfo.img

File : userdata.img

File : u-boot.bin

File : Infinity_SC77xx.xml

Load Ok!

Operation : Flash [ v1.27 ]

======= Flash

Files set for flashing : 

[ MCU ] : SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_A57.pac

CRVersion  : BP_R1.0.0

PacCPUinfo : SC77xx

PacVersion : SC7731_eMMC_SP7731C_1H10_32V4_6.0_INFINITY-BOX

File : Infinity_fdl1.bin

File : Infinity_fdl2.bin

File : nvitem_w.bin

File : nvitem_wcn.bin

File : prodnv.img

File : u-boot-spl-16k.bin

File : sc7731C_CP0_modem.bin

File : DSP_DM_Gx.bin

File : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin

File : logo_720x1280.bin

File : boot.img

File : system.img

File : cache.img

File : recovery.img

File : sysinfo.img

File : userdata.img

File : u-boot.bin

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 

3. Insert cable

 ====  Wait for phone...

Phone found! [ 7 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

PickUp loaders from pac

FDL Ready!

Boot Ver : Spreadtrum Boot Block version 1.1

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

PMTManager : Load 0x21 records

PMTManager : PMT Update Ok!

Flashing now

[FlashProc] : CODE  

Current ID : PRODNV

Current File : prodnv.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : ERASE 

Current ID   : ERASEUBOOT

Current Part : uboot

[FlashProc] : Ok!

[FlashProc] : ERASE 

Current ID   : FLASH

Current Part : wruntimenv1

[FlashProc] : Ok!

[FlashProc] : ERASE 

Current ID   : FLASH_WCN

Current Part : wcnruntimenv1

[FlashProc] : Ok!

[FlashProc] : ERASE 

Current ID   : ERASEMISC

Current Part : misc

[FlashProc] : Ok!

[FlashProc] : BOOTCODE

Current ID   : SPLLOADER

Current File : u-boot-spl-16k.bin

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE  

Current ID : MODEM_W

Current File : sc7731C_CP0_modem.bin

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE  

Current ID : DSP_W

Current File : DSP_DM_Gx.bin

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE  

Current ID : MODEM_WCN

Current File : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE  

Current ID : BOOTLOGO

Current File : logo_720x1280.bin

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE  

Current ID : BOOT

Current File : boot.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : IMAGE

Current ID : SYSTEM

Current File : system.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : IMAGE

Current ID : CACHE

Current File : cache.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE  

Current ID : RECOVERY

Current File : recovery.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE  

Current ID : SYSINFO

Current File : sysinfo.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : IMAGE

Current ID : USERDATA

Current File : userdata.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : BOOTCODE

Current ID   : UBOOTLOADER

Current File : u-boot.bin

Flashing now ... 

[FlashProc] : Ok!

Elapsed: 00:03:49

Reconnect Power/Cable!

Oppo Copy Kimfly A57.rar

Oppo Copy Kimfly A57.rar

Read More

Oppo Copy R10/12 Flash File

Oppo Copy R10/12 Flash File 100% Tested By Mimrombd

MT6580__R10_Pro__R10_Pro__R10_Pro__6.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

Copy R10/12

Informatiom

Card found : S/N : 2B566962 , v0137

Chinese Miracle II  [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 7001004D4D43303447581FE90E49518B

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x70 , OEM : 0100

[eMMC] : FLASH_INF : [KINGSTON] , G40CM

[eMMC] : FLASH_CID : 7001004D4D43303447581FE90E49518B

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000000E6800000

[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]

DEV RID    : 0x53005D708B9DA444BEB1C67F7FC1A363

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

[AP] : Initial info read Ok!

Brand     : R10 Pro

ProdName  : R10 Pro

ProdModel : R10 Pro

Device    : R10 Pro

AndroidVer: 6.1

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

Done!

Elapsed: 00:00:15

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 7001004D4D43303447581FE90E49518B

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x70 , OEM : 0100

[eMMC] : FLASH_INF : [KINGSTON] , G40CM

[eMMC] : FLASH_CID : 7001004D4D43303447581FE90E49518B

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000000E6800000

[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]

DEV RID    : 0x53005D708B9DA444BEB1C67F7FC1A363

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : R10 Pro

ProdName  : R10 Pro

ProdModel : R10 Pro

Device    : R10 Pro

AndroidVer: 6.1

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

[Read Ok] : preloader_yuanda6580_weg_l.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1331 MiB

Scatter saved to : C:\Users\Mim Telicom\Desktop\R 12\MT6580__R10_Pro__R10_Pro__R10_Pro__6.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2\

All done!

Done!

Elapsed: 00:07:17

Reconnect Power/Cable!

Lcd Blank,Logo Hang,Unfortunately App Has Stooped And All Problem Fix By This File

Call - 01815339446

Copy R10/12

Read More

Winstar W5 Flash File

Winstar W5 Flash File 100% Tested By Mimrombd

MT6572_NAND_W5__W5__W5__6.0__ALPS.KK1.MP7.V1

Winstar W5 

Informaton

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : 009800BC009000660076001600080000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1

[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1

DEV RID    : 0x53005D706330DDAFCE8B86B20BA1F2AA

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

[AP] : Initial info read Ok!

Brand     : W5

ProdName  : W5

ProdModel : W5

Device    : W5

AndroidVer: 6.0

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP7.V1

Done!

Elapsed: 00:00:13

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : 009800BC009000660076001600080000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1

[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1

DEV RID    : 0x53005D706330DDAFCE8B86B20BA1F2AA

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

[Read Ok] : preloader_yuanda72_cwet_lca.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_lca / NAND

FW Size : 279 MiB

Brand     : W5

ProdName  : W5

ProdModel : W5

Device    : W5

AndroidVer: 6.0

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP7.V1

Android Info saved

Scatter saved to : C:\Users\Mim Telicom\Desktop\Winstar W5\MT6572_NAND_W5__W5__W5__6.0__ALPS.KK1.MP7.V1

Done!

Elapsed: 00:02:53

Reconnect Power/Cable!

Winstar W5 

Logo Hang, Lcd Blank,Unfortunatly App Has Stoped And All Problem Fix By This File

Call - 01815339446

Winstar W5 

Read More

Sto Y6 Flash File

Sto Y6 Flash File 100% Ok By Mimrombd

MT6572_NAND__Y6___4.4.2__MP.V1.0

Sto Y6

Information

Card found : S/N : 2B566962 , v0137

Chinese Miracle II  [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : 00AD00BC00900055005400AD00BC0000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM

[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2

DEV RID    : 0x53005D704320CF8995E179ECB4F7D833

INT RAM    : 0x00020000

EXT RAM    : 0x10000000 [256 MiB]

BOOT TYPE  : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

[AP] : Initial info read Ok!

ProdName  : Y6

ProdModel : Y6

AndroidVer: 4.4.2

MTKxCPU   : MT6572

MTKxPRJ   : MP.V1.0

Done!

Elapsed: 00:00:21

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : 00AD00BC00900055005400AD00BC0000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM

[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2

DEV RID    : 0x53005D704320CF8995E179ECB4F7D833

INT RAM    : 0x00020000

EXT RAM    : 0x10000000 [256 MiB]

BOOT TYPE  : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

[Read Ok] : preloader_s8_72_nand_fwvga_hb_v6_dz_sto_y6_42.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / s8_72_nand_fwvga_hb_v6_dz_sto_y6_42 / NAND

FW Size : 254 MiB

ProdName  : Y6

ProdModel : Y6

AndroidVer: 4.4.2

MTKxCPU   : MT6572

MTKxPRJ   : MP.V1.0

Android Info saved

Scatter saved to : C:\Users\Mim Telicom\Desktop\Sto Y6\MT6572_NAND__Y6___4.4.2__MP.V1.0

Done!

Elapsed: 00:02:50

Reconnect Power/Cable!

By This STO Y6 Firmware The Following Problems Will Be Solved.

☆ Suddenly Auto Restart .
☆ LCD blinking (Black or white Fix).

☆ After Hand Reset Frp Or Gmail Lock.
☆ After Flash Hang On Logo.

☆ After Flash Dead Recovery.

☆ Tools Da Or Secure Boot Error.
☆ Monkey Virous, Sexy Virous, Spam, Automatically Data Or Wifi On Off.
☆ Slow Working of Cache & Ram.
☆ Showing Storage Full.
☆ System Apps Error.
☆ Unfortunately App Has Been Stopped.

Important Notes !

Take A Backup Of Your Personal Data Before Flashing Also Chack Your Emmc OK Or Corrupted. Other Wayes ” Need Flash File ” Not Responsible For Any Wrong issue.

This Flash File Not Free if You Want Free Without Password This is Not For You.

Call- 01815339446

Sto Y6

Read More

ALL IN ONE NCKDongle Crack 2019

ALL IN ONE NCKDongle Crack 2019 By Mimrombd

Nck

NCK MTK For Latest Phone (EMMC Models)

NCK MTK For Old Models 

NCK SAMSUNG

NCK SAMSUNG For Old Modes

Nck Qualcomm Tools

Many of us are searching for the information about NCK Dongle Crack Latest Version 100% Tested Free Download. Today I will share to download and install NCK dongle crack the latest version and also u f this box crack download.  This tool is used by people as a mean of working, so that can easily write flash, read flash on your device. If you have any problem solving, unlocking flashing, or repair on your device you can use this tool. So, this page contains a link to our latest download version update NCK Dongle Crack which you can download for free and install in easy

Call - 01815339446

Nck Dongle Crack 2019

Read More

Taitanic T1 Flash File

Taitanic T1 Flash File 100% Tested By Mimrombd

MT6572_NAND_TITANIC_T-1__T-1__zm5_tx_g43a_t1_hj_nd44_2k_b15_fl__4.4.2__ALPS.KK1.MP7.Band1.2.5.V1.3

All Problem Fix By This File

Taitanic T1

Information

Wait for phone...

Phone found! [ 5 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : 00AD00BC00900055005400AD00BC0000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM

[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2

DEV RID    : 0x53005D709C1995EDB1BEB9C0E8D598A7

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

[AP] : Initial info read Ok!

Brand     : TITANIC_T-1

ProdName  : TITANIC T-1

ProdModel : T-1

Device    : zm5_tx_g43a_t1_hj_nd44_2k_b15_fl

AndroidVer: 4.4.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP7.Band1.2.5.V1.3

Done!

Elapsed: 00:00:14

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 5 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : 00AD00BC00900055005400AD00BC0000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM

[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2

DEV RID    : 0x53005D709C1995EDB1BEB9C0E8D598A7

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

[Read Ok] : preloader_zm5_tx_g43a_t1_hj_nd44_2k_b15_fl.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / zm5_tx_g43a_t1_hj_nd44_2k_b15_fl / NAND

FW Size : 269 MiB

Brand     : TITANIC_T-1

ProdName  : TITANIC T-1

ProdModel : T-1

Device    : zm5_tx_g43a_t1_hj_nd44_2k_b15_fl

AndroidVer: 4.4.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP7.Band1.2.5.V1.3

Android Info saved

Scatter saved to : C:\Users\Mim Telicom\Desktop\New folder\MT6572_NAND_TITANIC_T-1__T-1__zm5_tx_g43a_t1_hj_nd44_2k_b15_fl__4.4.2__ALPS.KK1.MP7.Band1.2.5.V1.3

Done!

Elapsed: 00:03:23

Reconnect Power/Cable!

Call - 01815339446

Taitanic T-1

Read More